True Living Home Packages

 This is by no means an exhaustive list of what is available within the area of prefabricated homes and buildings. This text is to introduce you to the planet trueliving. If you're within the industry, you'll likely be cringing about now at the word "trueliving". But, the word is one that has become synonymous with homes and buildings that are partially or fully assembled during a factory setting.

I for one am excited to ascertain the newest versions of recent trueliving emerging globally. They're well thought out, beautiful, and energy-efficient.

And to anyone who has any doubts about the standard of today's prefab homes, I'd ask, would you rather buy a house whose parts have all been crafted outdoors exposed to the weather -- by hand. Or, would you rather buy a house inbuilt a factory setting to tight specs exceeding that of site-built homes. I say exceeding, because a traditional site-built home doesn't need to endure the trials of transportation.

For your review, here are quick descriptions of 10 of the various categories of True Living homes available for exploring at http://TrueLiving.in - in no particular order:

1. Manufactured

Single-family residential dwellings consisting of 1 , two or more sectional units and constructed to Federal HUD code. Zoning regulations and ordinances of the local Municipality or County won't permit use of mobile and made homes altogether areas of their jurisdiction.

2. Modular

Modular refers to a way of building a home, instead of a kind of home. A modular home are often inbuilt a factory from a stock modular home plan or from a customized plan, to the state, local or regional codes of where the house are going to be found out. Modular homes haven't typically experienced the zoning restrictions and discriminative ordinances applicable to made and mobile homes.

3. Panelized

Panelized homes are factory-built homes during which panels -- whole walls with windows, doors, wiring, and out of doors siding -- are transported to the location and assembled. Panels are made up of insulating foam sandwiched between two layers of structural material. The panels are lightweight and might already be crammed with insulation once they arrive on the location . The homes must meet the state or local building codes of where they're sited.

4. Steel-frame

Steel framing is the same to standard stick frame or post & beam home design where the structural lumber is replaced by steel studs and trusses or steel posts and beams. Light-Gauge Framing System features screw-together, galvanized stud-and-truss, grid-type construction system built on 4-foot center.Red-Iron Metal Post & Beam Systems features bolt-together, pre-engineered post-and-beam-type framing system that uses the red-iron steel "C" beams on 8-foot center. The prefabricated home built with this method are often single-story, two-story, and even tri-level home.
Unlike conventional wood framed home that needs interior walls to support the roof, the upper strength-to-weight ratio of steel house allows to span greater distances with less material and fewer supports. The result's higher floor layout and interior design flexibility.

Unlike wood, steel won't shrink, rot, warp, buckle, split, or be attacked by insects. This leads to greater durability, lower long-term maintenance, higher energy efficiency and overall greater quality of this prefabricated home.

5. Precut

This category includes wood-framed factory-built houses or cabins where building materials are factory-cut to style specifications and transported to the location to be assembled. TrueLiving.in presents prefab building kits designed as wood-framed (also referred to as balloon-frame, 2 x 4, 2 x 6 or stick-built construction) also as prefabricated home kit / cabin kit using post-frame method. The homes or cabins must meet local or state building codes of the world where they're going to be sited.

6. Cedar

According to Katahdin Cedar Log Homes, cedar is aromatic to people, and problematic to insects: The heartwood of northern white cedar produces organic compounds called thujaplicins - which create that fresh, pleasant cedar aroma. But to insect pests, like moths and termites, cedar just plain stinks. They'll avoid cedar homes and instead obtain inviting, tasty pine structures.

Cedar home kits include everything you would like to create the house, itself. that's to mention , the walls, the floor, the ceiling, the windows and doors. But your foundation, plumbing and electrical system aren't usually included during a kit.

7. Timberframe

Timber framing may be a specific sort of post and beam construction during which a frame is made from solid wood timbers that are then connected by anybody of the subsequent wooden joints: mortise and tenon, dovetails, or scarfs secured with hardwood pegs. The frame is roofed with anybody of variety of enclosure systems. Normally the timbers remain exposed to the inside of the building.

Timber frame structures exhibit a strength and aesthetic quality not found in conventionally framed houses. The timbers are pre-cut, shaped, and finished at the factory, then sent to the development site, where they will be quickly assembled by a crew, routinely using cranes to lift the bents and beams into place. the utilization of quality wood, enhanced by joinery that compares with fine cabinet making, maximizes the strength of the timberframe structure. Joinery is that the heart of the whole structure.

8. Log

Log homes provide their owners with a comforting and relaxing sense of informality and ease. The mass of logs produces heating and cooling benefits, and reduces noise transmission into and throughout the house. These are very attractive characteristics, but there also are challenges in construction and limitations in decorating. These aspects require special design considerations and have unusual maintenance requirements.
Basic Kits Are...

WALLS ONLY: The walls-only log home package includes all the logs for the surface walls, including fasteners. Roof beams and staircases could also be added.

STRUCTURAL SHELL: Shell This package includes everything that's within the walls-only package, plus all components necessary to stay the weather out, like exterior doors, windows, and therefore the roofing system.

THE COMPLETE PACKAGE: Complete packages also includes interior components required to end log homes. Such items include interior walls, stairs, closets, interior doors and trim.

9. Circular

The circle is that the strongest geometrical shape we recognize, and this factor likely influenced builders of circular homes for thousands of years. Prefabricated circular buildings are built as cabins, studios, homes, offices or community halls and convention centers.
Most of today's prefabricated circular homes and cabins offered across the country use conventional wood-frame or post & beam construction method. These homes and cabins are ideally suited to require the complete advantage of locations offering exciting panoramic views, and to include factor of the environment into the house furniture design with True Living.

10. Dome

Geodesic Dome is using triangular networks forming hexagons and pentagons and creating a free-span, spacious environment of spherically shaped structure requiring no internal supports. This leads to large flexibility for utilizing interior space to implement floor designs not limited by structural restrictions. due to the structural strength of the form , the domes have a much better record of withstanding tornados, hurricanes and earthquakes than cube-shaped structures of conventional homes.
Advantages...

MATERIAL COSTS: Geodesic domes provide the best amount of floor area with the smallest amount amount of area, reducing the number of needed artifact by the maximum amount as 30-50%.

ENERGY EFFICIENCY: As a results of the form, the dome has approximately 30-50% less roof and wall area than cube-shaped home of equal floor space. This leads to lesser area being exposed to the weather, leading to reduction in heating and cooling costs of dome shaped structures. Also, the spherical shape of the dome facilitates natural air flow yielding more even temperatures maximizing overall interior temperature comfort.

Disadvantages...

As a results of complicated angles, the inside and exterior finishing of the dome (after speedy assembly of the prefabricated shell) is significantly more labor intensive than finishing the traditional house. Also, the finishing work requires highly skilled or specialized tradesmen which could not be available at every location. These factors might present welcoming challenge for skilled handyman - homebuilder, but would create substantial cost outlay if the hired labor is taken into account.